PNEU-HYDRO品牌及主營產品介紹
PNEU-HYDRO流量控制產品為高規格液壓系統的需求提供了經濟高效的解決方案。
PNEU-HYDRO flow control products provide cost effective solutions to the demands of high-spec hydraulic systems.
概述
Overview
PNEU-HYDRO產品線為客戶提供可靠緊湊的控制閥解決方案，適用于石油和天然氣鉆井、油井干預、生產控制和其他石化活動。
PNEU-HYDRO產品已被證明能夠在下游設施、采礦業和其他一般工業過程中提供可靠的流量控制。
Supplies a large selection of flow control products to address the wide ranging needs of industrial pneumatic and hydraulic applications.
The PNEU-HYDRO product line provides our clients with reliable and compact control valve solutions for oil and gas drilling, well intervention, production control and other petrochemical activities.
PNEU-HYDRO products have been proven to provide reliable flow control in downstream facilities, the mining sector and other general industrial processes.
產品線范圍：
Product line Range:
? 泄壓閥 - 直通式和直角式
? 止回閥
? 手動閥
? 梭閥
? 快速排氣閥
? 氣動控制閥
? 壓力指示器
? 接口閥
? 先導傳感閥（高/低）
? Relief Valves - Both in-line and right angle
? Check Valves
? Hand Valves
? Shuttle Valves
? Quick Vent Valves
? Pneumatic Control Valves
? Pressure Indicators
? Interface Valves
? Pilot Sensing Valves (High/Low)
產品特點：
Product Features:
? 多種壓力范圍
? 性能平穩、無抖動
? 可靠且可重復的開啟和復位壓力
? 316 不銹鋼材質
? 工作壓力高達 10,000psi
? ?” – ?” NPT 連接
? Wide series of available pressure ranges
? Smooth, chatter-free performance
? Reliable and repeatable cracking and reseating pressures
? 316 SS construction
? Up to 10,000psi working pressure
? ?” – ?” NPT connections
這些多功能閥門主要面向能源行業設計，應用范圍廣泛，其設計和制造始終秉承一貫品質。以下列表總結了PNEU-HYDRO產品系列。
Designed primarily for the energy sector, these versatile valves can be used in a wide range of applications and are designed and manufactured with the same quality for which is known. The following list summarizes the product families within the PNEU-HYDRO line.
止回閥
Check Valves
PNEU-HYDRO 棒材止回閥即使在沒有背壓的情況下也能實現氣密密封。這些止回閥以其耐用性和可靠性而聞名，能夠提供順暢的流道和更小的阻力。
PNEU-HYDRO bar stock Check Valves seal bubble-tight, even without back pressure. Known for durability and reliable performance, these check valves provide a smooth flow-path with minimum resistance.
直角泄壓閥
Right Angle Relief Valves
PNEU-HYDRO 直角泄壓閥在達到開啟壓力前始終保持氣密性，并在開啟壓力下降 10% 以內（在較高壓力范圍內下降幅度更?。┘纯芍匦旅芊鈿饷苄浴Ｍ獠吭O定調節功能在需要進行壓力調整的應用中尤為實用。
PNEU-HYDRO Right Angle Relief Valves remain bubble-tight up to cracking pressure and reseal bubble-tight at less than 10% drop from cracking pressure (significantly less in the higher pressure ranges). The external setting adjustment is particularly useful in applications where changes are required.
直列式泄壓閥
Inline Relief Valves
PNEU-HYDRO 直列式泄壓閥在達到開啟壓力前始終保持氣密性。在較低量程下，其開啟壓力下降幅度小于 10%，在較高量程下，其開啟壓力下降幅度小于 5%。開啟壓力可靠、可重復，且易于通過內部調節裝置設定，一旦閥門安裝到系統中，即可防止篡改。
PNEU-HYDRO Inline Relief Valves remain bubble-tight up to cracking pressure. They reseal at less than 10% drop from cracking pressure in lower ranges, and less than 5% at higher ranges. Cracking pressure is reliable, repeatable, and easily set by an internal adjustment, which is tamper-proof once the valve is installed in the system.
微型泄壓閥
Miniature Relief Valves
氣液微型泄壓閥在達到開啟壓力前均能實現零泄漏，并在開啟壓力的 5 - 10% 范圍內實現氣密性再密封。調節不受溫度變化影響。提供排氣至接口或排氣至大氣兩種配置。
PNEU-HYDRO Miniature Relief Valves provide zero leakage up to cracking pressure, and they reseal bubble-tight within 5 - 10% of cracking pressure. Adjustments are insensitive to temperature variations. Available in vent-to-connection or vent-to atmosphere configurations.
快速排氣閥
Quick Vent Valves
PNEU-HYDRO 快速排氣閥旨在在排氣時從執行器提供高流量，同時在正常運行下也能提供可靠且無泄漏的性能。此功能減少了對執行器的限制，從而提供更一致且可預測的液壓性能。
PNEU-HYDRO Quick-Vent Valves are designed to provide high flow rates from an actuator when supply pressure is vented, while also providing reliable and leak free performance under normal operation. This functionality reduces restrictions on actuators, providing more consistent and predictable hydraulic performance.
過流止回閥
Excess Flow Check Valves
PNEU-HYDRO 過流止回閥旨在在下游發生災難性故障時控制受壓流體。彈簧式提升閥在正常運行期間保持打開狀態，允許流體雙向自由流動；一旦檢測到泄漏并達到壓差閾值，則自動關閉。
PNEU-HYDRO Excess Flow Check Valves are designed to contain pressurized f luids in the event of catastrophic downstream failure. The spring-loaded poppet is held open during normal operation, permitting free flow in both directions, and automatically closes once a leak is detected and a pressure differential threshold is reached.
手動閥
Hand Valves
PNEU-HYDRO 手動閥采用緊湊型設計，提供持久精準的流量控制。特氟龍閥桿填料和樞軸旋轉接頭有助于防止污染和沖刷，同時確?？煽俊⑤p松的操作。
PNEU-HYDRO Hand Valves provide durable and precise flow control in a compact design. The Teflon stem packing and pintle swivel help to prevent contamination and washout while also ensuring reliable and effortless operation.
接口閥
Interface Valves
PNEU-HYDRO接口閥可為高達 10,000 psi 的液壓功能提供可靠的氣動控制。這些三通兩位閥提供常開和常閉兩種版本。
PNEU-HYDRO Interface Valves provide reliable pneumatic control over hydraulic functions up to 10,000 psi. These three-way two position valves are available in both normally open and normally closed versions.
H-2 高低先導閥
H-2 High-Low Pilot Valves
PNEU-HYDRO HL-2 高低先導閥用于感測管路壓力，并保護設備免受異常情況的影響。這些可調節閥門可常閉或常開，控制氣動和液壓系統。
PNEU-HYDRO HL-2 High-Low Pilot Valves are used to sense flow-line pressure and protect equipment from abnormal conditions. These adjustable valves can function as normally closed or normally open, controlling both pneumatic and hydraulic systems.
H-2 高低歧管先導閥組件
H-2 High-Low Manifold Pilot Valve Assembly
PNEU-HYDRO先導閥歧管組件利用一對可調節的先導閥來監測管路壓力。當檢測到高限或低限時，該組件會阻斷并釋放控制壓力，從而實現系統故障安全關閉。
PNEU-HYDRO Pilot Valve Manifold assemblies utilize a pair of adjustable pilot valves to monitor flow line pressure. When a high or low limit is sensed, the assembly blocks and bleeds control pressure to provide fail safe shutdown of the system.
氣動控制閥
Pneumatic Control Valves
PNEU-HYDRO氣動控制閥采用先導式或手動按鈕控制，提供可靠的控制。這些三通兩位閥門可在啟動時選擇供氣或排氣。
PNEU-HYDRO Pneumatic Control Valves provide reliable control with pilot or manual push button control. These 3-way, 2-position valves are designed to select supply or vent to a function when actuated.
梭閥
Shuttle Valves
PNEU-HYDRO梭閥適用于需要冗余或多源供氣的系統。其簡單的球體和彈性閥座設計可提供有效可靠的被動切換。
PNEU-HYDRO Shuttle Valves are used in systems where redundant or multiple supply sources are required. A simple ball and elastomeric seat design provides effec tive and reliable passive switching.
防砂探管閥
Sand Probe Valves
PNEU-HYDRO防砂探管閥可在管線侵蝕達到預定程度時提供視覺指示并向控制系統發出信號。這些二通、二位、常開型閥門由管線壓力控制，管線壓力通過犧牲探頭上的侵蝕開口進入閥門。
PNEU-HYDRO Sand Probe Valves provide a visual indication and a control system signal once a predetermined level of erosion has occurred in a flowline. These 2-way, 2-positon, normally open valves are piloted by flowline pressure entering the valves through an eroded opening in a sacrificial probe.
內聯過濾器
Inline Filters
PNEU-HYDRO 內聯過濾器為過濾控制系統流體提供了高效且經濟的解決方案。這些通用過濾器配備可更換濾芯，適用于多種顆粒尺寸范圍。
PNEU-HYDRO Inline Filters provide an effective and economic solution for filter ing control system fluid. These universal filters are equipped with replaceable elements available in several particulate size ranges.
壓力指示器
Pressure Indicators
PNEU-HYDRO壓力指示器可以直觀地指示氣壓的存在。
PNEU-HYDRO Pressure Indicators provide a visual indication for the presence of pneumatic pressure.
PNEU-HYDRO O型圈工具套件
PNEU-HYDRO O-ring Tool Kit
PNEU-HYDRO 工具套件包含專門設計的用于安裝和拆卸 O 型圈的工具。這些工具對于從事氣動、液壓和其他流體設備的工程師、技術人員和裝配人員來說至關重要。它們采用耐腐蝕材料制成，可與大多數流體兼容，并可用于潔凈室應用。
PNEU-HYDRO kit of specifically designed tools for installing and extracting O-rings. Tools are invaluable to engineers, technicians and assembly personnel working on pneumatic, hydraulic and other fluid devices. They are fabricated from corrosion resistant materials for compatibility with most fluids and may be used in clean-room applications.
聲明：
-文章轉載自PNEU-HYDRO，由愛澤工業翻譯，如有侵權，請聯系刪除！
-如有偏頗，歡迎指正！
